1 the pe340s high performance test cables 0.195 inch diameter and 83% phase velocity offer very low loss performance up to 18 ghz. the durable stainless steel connectors and fep jacket provide a cost effective design ideal for test environments where a rugged cable assembly is required. the series is offered with type n, tnc, and sma connectors all rated to 18 ghz. a heavy duty boot provides improved strain relief and adds to the durability of the cable assemblies. these cable assemblies are built using a double shielded fexible cable, providing excellent shielding effectiveness of greater than 95 db. all pe340 cable assemblies are 100% continuity, hi-pot, and rf tested to published specifcations. custom lengths are built to order and shipped same day. ? 83% velocity of propagation ? shielding effectiveness > 95 db ? maximum vswr is < 1.35:1 to 18 ghz ? minimum bend radius of 1.5 inches ? operating temperature range of -55 to +125 c ? rohs and reach compliant ? same day shipment of custom lengths ? 100% continuity, hi-pot, and rf tested confguration connector 1 sma male connector 2 sma female cable type pe-p142ll electrical specifcations frequency range, ghz dc to 18 impedance, ohms 50 maximum vswr 1.35:1 velocity of propagation, % 83 rf shielding, db 95 typical performance by frequency frequency 1 frequency, mhz 400 insertion loss 0.045 db [0.15 db ] power handling, kwatts 1.2 frequency 2 frequency, mhz 1000 insertion loss 0.072 db [0.24 db ] power handling, watts 700 frequency 3 frequency, ghz 2 insertion loss 0.103 db [0.34 db ] power handling, watts 500 click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: sma male to sma female low loss test cable 100 cm length using pe-p142ll coax, rohs PE340-100CM PE340-100CM rev 1.2 PE340-100CM sma male to sma female low loss test cable 100 cm length using pe-p142ll coax, rohs technical data sheet technical data sheet
2 frequency 4 frequency, ghz 3 insertion loss 0.127 db [0.42 db ] power handling, watts 400 frequency 5 frequency, ghz 5 insertion loss 0.166 db [0.54 db ] power handling, watts 300 frequency 6 frequency, ghz 10 insertion loss 0.24 db [0.79 db ] power handling, watts 220 frequency 7 frequency, ghz 18 insertion loss 0.33 db [1.08 db ] power handling, watts 160 electrical specifcation notes: power handling values are calculated based on cable properties. power handling will vary based on the actual vswr of the cable assembly. mechanical specifcations cable cable type pe-p142ll no of shields 3 dielectric type ptfe jacket material fep cable color green jacket diameter, in [mm] 0.195 [4.95] connector 1 type sma male connector 1 specifcation mil-std-348, fig 310-1 confguration straight inner conductor material and plating beryllium copper , gold inner conductor plating specifcation astm-b488 50 in. minimum coupling nut material and plating passivated stainless steel coupling nut plating specifcation sae-ams-2700 hex size, inch 5/16 torque, in-lbs [nm] 8 [0.9] body material and plating passivated stainless steel body plating specifcation sae-ams-2700 PE340-100CM rev 1.2 PE340-100CM click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: sma male to sma female low loss test cable 100 cm length using pe-p142ll coax, rohs PE340-100CM sma male to sma female low loss test cable 100 cm length using pe-p142ll coax, rohs technical data sheet technical data sheet
3 dielectric type ptfe connector 2 type sma female confguration straight inner conductor material and plating beryllium copper , gold inner conductor plating specifcation astm-b488, 50 in. minimum outer conductor material and plating passivated stainless steel outer conductor plating specifcation sae-ams-2700 body material and plating passivated stainless steel body plating specifcation sae-ams-2700 dielectric type ptfe temperature temperature operating range, deg c -55 to +125 size length, in [cm] 39.37 [100] diameter, in [mm] 0.37 [9.4] . weight, lbs [g] 0.038 [17.24] repeated minimum bend radius, in [mm] 1 [25.4] compliance certifcations (visit www.pasternack.com for current document) rohs compliant y es reach compliant 07/19/2006 plotted and other data notes: v alues at 25 c, sea level sma male to sma female low loss test cable 100 cm length using pe-p142ll coax, rohs from pasternack enterprises has same day shipment for domestic and international orders. our rf , microwave and fber optic products maintain a 99% availability and are part of the broadest selection in the industry. click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: sma male to sma female low loss test cable 100 cm length using pe-p142ll coax, rohs PE340-100CM url: http://www.pasternack.com/sma-male-sma-female-pe-p142ll-cable-assembly-PE340-100CM-p.aspx PE340-100CM rev 1.2 PE340-100CM sma male to sma female low loss test cable 100 cm length using pe-p142ll coax, rohs technical data sheet technical data sheet
4 ? 2014 pasternack enterprises all rights reserved PE340-100CM rev 1.2 sma male to sma female low loss test cable 100 cm length using pe-p142ll coax, rohs PE340-100CM cad drawing
|
